top of page
Screenshot 2023-09-29 091149.png

Damage Control Lockers

EST Companies provides a fully developed damage control storage locker in a containerized format. These DC lockers include built in lockers for turnout gear, workbench space, built in cabinetry, dehumidification and electrical distribution/lighting throughout for humidity controlled storage and work space.

  • DC Locker (EST Part #6085ILA)

    • 20’ non fire rated containers

    • Area classification: general purpose (safe electrical area)

    • Paint Containers: Red finish topcoat

      • Top up paint for electrical penetration​

    • Doors: (1) Set of double cargo doors

    • Penetrations: Electrical

    • Dimensions in mm for each 20ft module: 6,058L x 2,438W x 2,591H

    • Wall, Roof, Floor

      • Wood framing

      • Finished walls & ceiling (architectural wall panels)

      • Floor – paint existing container wood flooring

    • Electrical 

      • 208V, single phase, general purpose

      • (1) Electrical panel

      • (2) Overhead lights

      • (1) Light switch

      • (3) 4 Plug receptacles over work bench

    • HVAC: (2) Dehumidifiers per container

    • Furniture/Storage

      • (1) Aluminum slat wall (over workbench)

      • (1) Work bench top

      • (1) Vidmar cabinets (model #SVS1551A) w/ extra shelf

      • (2) Vidmar cabinets (model #SVS340X2A)

      • (2) Vidmar cabinet (model #SC155X1A)

      • (2) Vidmar cabinets (model #SC200X1A)

      • (1) Vidmar cabinet (model #LWS2001A)

      • (3) Vidmar cabinets (model #SVS3402A)

      • (9) Hallowell steel gear lock

​

​

​

​

​

​

​

​

​

​

  • IMS Locker (EST Part #NMS8108)

    • Area Classification: General Purpose (safe area)

    • Overall exterior dimensions: 8’ x 10’ x 8’6”H

    • Wall, Roof, Floor, Doors: Marine finished walls and ceiling (architectural wall panels)

      • Rubber floor tiles (20” x 20” over— existing marine grade plywood decking

      • (1) Man door

      • (1) Cargo door

      • (1) Removable awning on 8’ side

    • Electrical

      • 208V, single phase, general purpose

      • (2) Overhead vapor tight lights

      • (2) Exterior lights with photocell (weatherproof)

      • (5) Interior receptacles

      • (1) Standard disconnect

    • HVAC: (1) Packaged terminal air

    • Painting: Painting: All exterior steel works will be blasted and painted with a standard paint system (following customer request of red primary color and 36” tall horizontal white stripe around building)

    • Furniture

      • Wire rack with 4 shelves

      • Work bench top over cabinets

      • (2) Vidmar cabinets with drawers

  • General Workshop Container (EST Part #GWC2088)

    • Area Classification: General Purpose (safe area electrical)​

    • Dimensions in mm for each 20ft module: 6,058L x 2,438W x 2,591H

    • Wall, Roof, Floor, Doors​

      • Marine panel walls

      • Marine rated ceiling

      • Floor — paint existing container wood flooring

      • (1) set of cargo doors

      • (1) bulkhead wall

      • (1) Personnel door within bulkhead wall

    • Electrical

      • 208V, single phase

      • (1) Electrical panel

      • (2) Overhead lights

      • (1) Light switch

      • (3) 4 Plug receptacles over the work bench

      • (1) Plug for the A/C unit

      • (1) RV style recessed disconnect plug

    • HVAC

      • HVAC window unit with A/C only

      • (2) Dehumidifiers

    • Overhead Cabinets

      • (2) Vidmar—SOS0155 w/ CS40 Shelf: 27.83”H x 30”W x 27.75”D

      • (1) Vidmar—SVSOS0155 w/ SVCS40 Shelf: 27.83”H x 22.5”W x 27.75”D

    • Base Cabinets

      • (2) Vidmar— ST0340 w/ drawers: 59”H x 30”W x 27.75”D

      • (3) Vidmar – SV0340 w/ drawers: 59”H x 22.5”W x 27.75”D

      • (2) Vidmar – ST0200 w/ drawers: 37”H x 30”W x 27.75”D

      • (1) Vidmar – LW0200 w/ drawers: 37”H x 30”W x 21.38”D

    • Painting: New top coat (red finish)

    • Lifting lugs: 4 Lifting lugs per module

​

​

​

​

​

​

​

​

​

​

  • 40’ Double Wide Container (EST Part #12840DBHC)

    • (2) 40’ double end containers​

    • Side wall cutout for joining face

    • Area classification: General purpose (safe are electrical)

    • Wall, Roof, Floor, Doors

      • Marine panel walls

      • Marine rated ceiling

      • Floor— paint existing container wood

      • (2) Set of cargo doors

      • (1) Bulkhead wall

      • (1) Personnel door withing bulkhead wall

    • Electrical:

      • 208V, single phase

      • (1) Electrical panel

      • (8) Overhead lights

      • (2) Light switch

      • (12) 4 Plug receptacles over the work bench

    • HVAC

      • (2) Split A/C condenser units mounted withing equipment bay bulkhead area

      • (4) Ductless wall mounted A/C fan units

    • Furniture

      • (1) 8’W Countertop along bulkhead wall

      • Lowe cabinets beneath countertop for storage of coffee and break room materials

  • PCM Container (EST Part #2438PCWC)

    • (1) 20’ Non-Fire rated, converted (one-trip) container​

      • Conversion package to PCM workshop container​

    • Area classification: General purpose (safe are electrical)

    • Modules will be fabricated from existing ISO container of good condition (one-trip)

    • Dimensions in mm for each 20’ module: 6,058L x 2,438W x 2,591H

    • We have considered our standard vendor list for this project. Alternative vendors if requested by the client shall be charged extra, if required.

    • CSC visual inspection

    • Red top coat paint or standard color

    • Retractable awning shall be uninstalled for transport and will be installed upon delivery

    • Ramp will be provided and shipped within the container

    • Package terminal air conditioner will be installed on top wall in lieu of by the floor as normally installed

    • Cabinet sizing shall be confirmed upon development of   general arrangement drawings and will be revised if required to fit within the necessary footprint of the building

    • Roll out drawers and roll out work bench top shall have the capability to handle 200 lbs. each

    • Product Description: 20’ Non-Fire rated PCM container

    • Certification:  Visual certification to CSC

    • Wall, Roof, Floor, Doors

      • Marine panel walls (insulated)

      • Marine rated ceiling

      • Floor— paint existing container wood

      • (1) Set of double cargo doors

      • (1) Aluminum man door

      • Note: insulation behind wall panels bot included

    • Penetrations: Electrical

    • Slings: N/A—no lifting slings required

    • Electrical: 208, single phase, general purpose

      • (1) electrical panel

      • (2) overhead lights

      • (3) 4 plug receptacles over the work bench

      • (1) motion activated sensor

      • (1) RV style recessed disconnect plug

    • HVAC: (1) 15,000 BTU w/ electric heat packaged terminal A/C

    • Furniture

      • (1) 10”L x 4”H White Board

      • (2) Work bench tops (SSRG standard) (One work bench top shall slide out)

      • (1) 24” x 36” Hydraulic die lift table (WESCO 273265)

      • (1) Wall mount shop vac, 4.5 gal tank size (Dayton 61HV95)

      • (1) Retractable awning (Kammok Crosswing, awning dimensions: 84”W x 78”L)

      • (1) 2 Ton manual trolley hoist

      • Vertical cabinet w/ tambour doors, 3 sections, 172.5”W x 22.75”D x 90.75”H

    • Doors changed to tambour to provide a more secure solution during transport

      • PCM Shelves w/ roll out trays, 44”W x 27.75”D x 86.5”H

      • Workbench #1: 56.5”L x 28.5”D x 37.25”H

      • Workbench #2: 56.5”L x 28.5”D x 37.25”H

      • (1) 30”W x 27.75”D x 59.13”H Vidmar cabinet w/ 12.5” open shelf, (7) 3” drawers, (2) 4” drawers (colors to match other cabinet/drawer units)

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

  • Seismic Response Tool Kit Container (EST Part #SK3662TK)

    • 20’ Container conversion

    • Area Classification: General purpose

    • Wall, Roof, Floor, Doors:

      • Marine panel walls

      • Marine rated ceiling

      • Floor — paint existing container wood flooring

      • (1) Set of double cargo doors (to remain installed)

      • (1) Single exterior steel man door

      • (1) Bulkhead wall with door

      • (1) Swing up door with gas struts or other assisting devices for lifting. To be manufactured out of aluminum

    • Overall exterior dimensions: 20’L x 8’W x 8’6”H

    • Lifting Provisions: Corner lift Points

    • Electrical:

      • (1) Electrical panel

      • (2) Overhead lights

      • (1) Exterior flood light under swing up door

      • (8) Duplex outlets

      • (2) Motion activated sensors

      • (1) RV style recessed disconnect plug

    • HVAC: No HVAC or dehumidifiers

    • Fire and Gas Detection: Not included in scope

    • PAGA: Not included in scope

    • Communication: Not included in scope

    • Furniture

      • (4) 10’ sections of E-track installed

      • (2) Sets of 48”W x 18”D x 37”H shelves with worktop

    • Painting: New top coat (white finish)

    • Penetrations: Electrical disconnect only

  • Seismic COMM Shelter (EST Part #SK4788CMU)

    • 20’ Container conversion

    • Area Classification: General Purpose

    • Wall, Roof, Floor, Doors:

      • Marine panel walls

      • Marine rated ceiling

      • Floor — paint existing container wood flooring

      • (1) Set of double cargo doors (to remain installed)

      • (1) Swing up door with gas struts or other assisting devices for lifting. To be manufactured out of aluminum

    • Overall exterior dimensions: 20’L x 8’W x 8’6”H

    • Lifting Provisions: Corner lift Points

    • Electrical:

      • (1) Electrical panel

      • (2) Overhead lights

      • (1) Exterior flood light under swing up door

      • (4) Duplex outlets

      • (1) Motion activated sensors

      • (1) RV style recessed disconnect plug

    • HVAC: No HVAC or dehumidifiers

    • Fire and Gas Detection: Not included in scope

    • PAGA: Not included in scope

    • Communication: Not included in scope

    • Furniture

      • (6) 10’ sections of E-track installed

    • Painting: New top coat (white finish)

    • Penetrations: Electrical disconnect only

​

​

​

​

  • Seismic Staging Shelter (EST Part #SK67514SGU)

    • 20’ Container conversion

    • Area Classification: General Purpose

    • Wall, Roof, Floor, Doors:

      • Marine panel walls

      • Marine rated ceiling

      • Floor — paint existing container wood flooring

      • (1) Set of double cargo doors (to remain installed)

      • (1) Swing up door with gas struts or other assisting devices for lifting. To be manufactured out of aluminum

    • Overall exterior dimensions: 10’L x 8’W x 8’6”H

    • Lifting Provisions: Corner lift Points

    • Electrical:

      • (1) Electrical panel

      • (2) Overhead lights

      • (1) Exterior flood light under swing up door

      • (4) Duplex outlets

      • (1) Motion activated sensors

      • (1) RV style recessed disconnect plug

    • HVAC: No HVAC or dehumidifiers

    • Fire and Gas Detection: Not included in scope

    • PAGA: Not included in scope

    • Communication: Not included in scope

    • Furniture

      • (6) 10’ sections of E-track installed

    • Painting: New top coat (white finish)

    • Penetrations: Electrical disconnect only

​

​

​

​

  • Tooling Container with Roll Up Door (EST Part #3120SCRU)

    • 20’ Standard height shipping container

    • (2) Shelving units per container with 3 tier configuration (installed across from roll up door)

    • (1) 4’ x 8’ manual roll up door (installed on broad side of container)

    • Paint the container exterior tan

​

Inside 1 .png
Inside 3.png
Drawing .png
image.png
Picture1.png
Picture2.png
Picture3.png
Picture6.png
Picture4.png
Picture5.png
image.png
image.png
image.png
image.png
image.png
image.png
image.png
bottom of page