Pacific Industrial/Industrial...

Pacific Industrial/Industrial Vacuum

EST supports customers implementation and sustainment needs with equipment from Industrial Vacuum. This equipment includes:

Filt-Aire Skid Mounted Dust Collectors

2000 CFM Electric Powered Dust Collector

Model #PDC2500-E
Dimensions
- 88"L x 48"W x 87"H
- 1500 lbs.
Air Volume
- 2,000 ACFM at - 6" W.G.
Power Source
- 5 HP, 230/460 V, 3 Phase, TEFC motor, 5 HP rated enclosed motor starter with 120 VAC controls, pre-wired plug @ 15'
Filtration
- 3 Stage Filtration
  - Cyclonic Separator
  - Stainless steel wire mesh pre-filter, spark arrestor
  - (2) Nanofiber cartridge media, fire retardant, MERV 15, 520 sq ft. media, 99.97% @ 0.3 micron
Standard Equipment
- (1) 10" QF inlet hose connection with 8" QF reducer
- Adjustable timed pulse jet cartridge cleaning system
- Inlet air regulator with gauge
- Magnehelic gauge
- Dust & debris dropout drawer
- Fork pockets in base
- 12 gauge carbon steel construction
- Epoxy primer & polyurethane enamel top coat
Options
- 120/230 V, 1 Phase, TEFC motor
- Dual voltage selector switch, 240/480 V
- Gasoline engine power source
- On-Board air compressor package
- Compressor cold weather kit
- Sound package for ultra quiet operation
- HEPA rated discharge filter
- Poly paint pad prefilter
- Explosion proof options NEMA 7/9
- Bulk bag unloading attachment
- 55 gallon drum lifting & pivot clamp

6000 CFM Electric Powered Dust Collector

Dimensions
- 99"L x 90"W x 118"H (Stowed) or 158"H (Raised)
- 4,500 lbs.
Air Volume
- 6,000 ACFM at - 12" W.G.
Power Source
- 20 HP, 460 V, 3 Phase TEFC motor with air control in a NEMA enclosure
Frame
- 12 gauge steel construction with fork pockets
- Heavy duty steel tube frame and certified lifting eyes
Filtration
- 12 cartridge filters with pulse jet style cleaning system
- Air to cloth ratio 2.4:1 (2496 sq. ft. of filter area)
Standard Equipment
- (2) 12" inlet connections quick release ducting
- Adjustable drum cover kit (manual crank down)
- Four telescoping legs with pins
- Inlet air regulator
- Magnehelic gauge
- Four point heavy duty lifting cage (low profile)
- Manual outlet damper with protective screen
- Quick release filter access
- Shipping container loading
Options
- 16" inlet connections
- Diesel power package
- Air compressor package
- DOT approved tandem axle trailer
- Ladder kit
- Sound package for quiet operation
- Removable feet (caster or v-groove)
- Discharge height leg extensions
- Four-way fork tubes
- Camlock connections (electric panel connections)
- Explosion proof vents, motor & fans
- Pneumatic vibrators
- Inlet & outlet connections

12,000 CFM Electric Powered Dust Collector

Dimensions
- 161"L x 93"W x 118"H (Stowed) or 158"H (Raised)
- 7,000 lbs.
Air Volume
- 12,000 ACFM at - 10" W.G.
Power Source
- 40 HP, 460 V, 3 Phase TEFC motor with all controls in a NEMA enclosure
Frame
- 12 gauge steel construction with fork pockets
- Heavy duty steel tube frame and certified lifting eyes
Filtration
- 24 cartridge filters with pulse jet style cleaning system
- Air to cloth ratio 2.4:1 (4992 sq. ft. of filter area)
Standard Equipment
- (2) 16" inlet connections quick release ducting
- Adjustable drum cover kit (manual crank down)
- Four telescoping legs with pins
- Inlet air regulator with gauge
- Magnehelic gauge
- Four point heavy duty lifting cage (low profile)
- Manual outlet damper with protective screen
- Quick release filter access
- Shipping container loading
Options
- Diesel power package
- Air compressor package
- DOT approved tandem axle trailer
- Ladder or platform kit
- Sound package for ultra quiet operation
- Removable feet (caster or v-groove)
- Nanofilter media MERV 15
- Electrical panel Camlock connections
- Explosion proof options
- Pneumatic vibrators
- Inlet & outlet connections

20,000 CFM Electric Powered Dust Collector

Dimensions
- 239"L x 99"W x 124"H (Stowed) or 164"H (Raised)
- 12,500 lbs.
Air Volume
- 20,000 ACFM at - 10" W.G.
Power Source
- 50 HP, 460 V, 3 Phase TEFC motor with all controls in a NEMA 4 enclosure
Frame
- 12 gauge steel construction with fork pockets
- Heavy duty steel tube frame and certified lifting eye
Filtration
- 36 cartridge filters with pulse jet style cleaning system
- Air to cloth ratio 2.46:1 (8,136 sq. ft. of filter area)
Standard Equipment
- (3) 20" inlet connections quick release ducting
- Adjustable drum cover kit (manual crank down)
- Six telescoping legs with pins
- Inlet air regulator with gauge
- Magnehelic gauge
- Four point heavy duty lifting cage (low profile)
- Manual outlet damper with protective screen
- Quick release filter access
Options
- Diesel power package
- Air compressor package
- DOT approved tandem axle trailer
- Ladder or platform kit
- Sound package for ultra quiet operation
- NEMA 4 or 4X soft start
- Nanofilter media MERV 15
- Electrical panel Camlock connections
- Explosion proof options
- Pneumatic vibrators
- Inlet & outlet connections

40,000 CFM Electric Powered Dust Collector

Dimensions
- 387"L x 102"W x 135"H (Stowed) or 175"H (Raised)
- 19,000 lbs.
Air Volume
- 40,000 ACFM at 10" W.G.
Power Source
- 125 HP, 460 V, 3 Phase TEFC motor with soft start controls in a NEMA 4 enclosure
Frame
- 12 gauge steel construction with fork pockets
- Heavy duty steel tube frame and certified lifting eyes
Filtration
- 72 cartridge filters with pulse jet style cleaning system
- Air to cloth ratio 2.67:1 (14,976 sq. ft. of filter area)
Standard Equipment
- (3) 24" inlet connections quick release ducting
- Adjustable drum cover kit (manual crank down)
- Eight telescoping legs with pins
- Inlet air regulator with gauge
- Magnehelic gauge
- Four point heavy duty lifting cage
- Manual fan outlet damper with protective screen
- Quick release filter access
Options
- Low grease points
- IEEE-841 serve duty motor
- Sound package for ultra quiet operation
- NEMA 4X stainless steel enclosure
- Nanofilter media MERV 15
- Electrical panel Camlock connections
- Explosion proof options
- Pneumatic vibrators
- Inlet & outlet connections

Filt-Aire Trailer Mounted Dust Collectors

6,000 CFM Diesel Powered Dust Collector

Dimensions
- 189"L x 99"W x 124"H
- 6,000 lbs.
Mobile or Skid Mounted
- Heavy duty 4" x 6" rectangular tube frame
Trailer
- Single axle, 7,000 lbs. Torflex with electric brakes
Power Source
- Available in a diesel or electric powered model
- 24 HP, 1.02 liter, Tier 4 Final Kohler engine
High Capacity
- Filtering capacity of 6,000 CFM at 12" W.G.
- Air to cloth ratio of 1.92:1 (3,120 sq. ft. filter area)
- 12 side loading easy access vertical filtering cartridges
Standard Equipment
- Solid state, programmable timer board for reverse air pulse filter cleaning
- High quality finish - epoxy primer & polyurethane top coat
- DOT approved LED trailer lighting & reflective recognition tape
- Standard one year limited warranty
- (2) 16" inlets with debris screens
- Direct drive hydraulically driven uploading auger with cleanout
- Steel engine shroud
- 38 gallon fuel tank
- Magnehelic gauge
- Bag clamp on auger outlet
- Engine block heater 120 VAC
Options
- Gooseneck trailer
- On board air compressor
- Frac package
- Artic air dryer
- Webasto programmable engine preheater
- LED work lights
- 60 gallon fuel tank
- 20 HP electric motor 460/3/60
- High static fan (14.5" W.G.)
- Tandem 6,000 lbs. Torflex axles
- Emergency engine shutdown
- 20 lbs. ABC fire extinguisher
- Cone vibrator (electric or pneumatic)
- Cummins or Kubota diesel engine
- 40 HP, 1.86 L, Tier 4 Final Kohler engine

12,000 CFM Diesel Powered Dust Collector

Dimensions
- 233"L x 99"W x 130"H
- 10,000 lbs.
Mobile or Skid Mounted
- Heavy duty 4" x 8" rectangular tube frame
Trailer
- Dual axle, 6,000 lbs. Torflex with electric brakes
Power Source
- Available in a diesel or electric powered model
- 48 HP, 1.86 liter, Tier 4 Final Kohler engine
High Capacity
- Filtering capacity of 12,000 CFM at 12" W.G.
- Air to cloth ratio of 2.3:1 (5,200 sq. ft. filter area)
- 20 side loading easy access vertical filtering cartridges
Standard Equipment
- Solid state, programmable timer board for reverse air pulse filter cleaning
- High quality finish - epoxy primer & polyurethane top coat
- DOT approved LED trailer lighting & reflective recognition tape
- Standard one year limited warranty
- (6) 16" inlets with debris screens
- Direct drive hydraulically driven uploading auger with cleanout
- Steel engine shroud
- 60 gallon fuel tank
- Magnehelic gauge
- Bag clamp on auger outlet
- Engine block heater 120 VAC
Options
- Gooseneck trailer
- On board air compressor
- Frac package
- Artic air dryer
- Webasto programmable engine preheater
- LED work lights
- 100 gallon fuel tank
- 40 HP electric motor 460/3/60
- High static fan (14.5" W.G.)
- 8,000 lbs. Torflex axles
- Emergency engine shutdown
- 20 lbs. ABC fire extinguisher
- Cone vibrator (electric or pneumatic)
- Cummins or Kubota diesel engine
- 56 HP, 1.86 L, Tier 4 Final Kohler engine

20,000 CFM Diesel Powered Dust Collector

Dimensions
- 286"L x 99"W x 130"H
- 12,500 lbs.
Mobile or Skid Mounted
- Heavy duty 4" x 10" rectangular tube frame
Trailer
- Dual axle, 7,000 lbs. Torflex with electric brakes
Power Source
- Available in a diesel or electric powered model
- 65 HP, 2.48 liter, Tier 4 Final Kohler engine
High Capacity
- Filtering capacity of 20,000 CFM at 12" W.G.
- Air to cloth ratio of 2.4:1 (8,320 sq. ft. filter area)
- 32 side loading easy access vertical filtering cartridges
Standard Equipment
- Solid state, programmable timer board for reverse air pulse filter cleaning
- High quality finish - epoxy primer & polyurethane top coat
- DOT approved LED trailer lighting & reflective recognition tape
- Standard one year limited warranty
- (6) 16" inlets with debris screens
- Direct drive hydraulically driven uploading auger with cleanout
- Steel engine shroud
- 60 gallon fuel tank
- Magnehelic gauge
- Bag clamp on auger outlet
- Engine block heater 120 VAC
Options
- Gooseneck trailer
- On board air compressor
- Frac package
- Artic air dryer
- Webasto programmable engine preheater
- LED work lights
- 100 gallon fuel tank
- 60 HP electric motor 460/3/60
- High static fan (14.5" W.G.)
- 10,000 lbs. Torflex axles
- Emergency engine shutdown
- 20 lbs. ABC fire extinguisher
- Cone vibrator (electric or pneumatic)
- Cummins or Kubota diesel engine
- 74 HP, 2.48 L, Tier 4 Final Kohler engine

45,000 CFM Diesel Powered Dust Collector

Dimensions
- 360"L x 101"W x 142"H
- 18,500 lbs.
Mobile or Skid Mounted
- Heavy duty 4" x 10" rectangular tube frame
Trailer
- Tri-axle, 8,000 lbs. Torflex with electric brakes
Power Source
- Available in a diesel or electric powered model
- 134 HP, 3.4 liter, Tier 4 Final Kohler engine with 120 gallon fuel tank
High Capacity
- Filtering capacity of 40,000 CFM at 12" W.G. and 45,000 CFM at 10" W.G.
- Air to cloth ratio of 2.6:1 (15,600 sq. ft. filter area)
- 60 side loading easy access vertical filtering cartridges
Standard Equipment
- Solid state, programmable timer board for reverse air pulse filter cleaning
- High quality finish - epoxy primer & polyurethane top coat
- DOT approved LED trailer lighting & reflective recognition tape
- Standard one year limited warranty
- (8) 20" inlets with debris screens
- Direct drive hydraulically driven uploading auger with cleanout
- Steel engine shroud
- 120 gallon fuel tank
- Magnehelic gauge
- Bag clamp on auger outlet
- Engine block heater 120 VAC
Options
- Gooseneck trailer
- On board air compressor
- Frac package
- Artic air dryer
- Webasto programmable engine preheater
- LED work lights
- 125 gallon fuel tank
- 60 HP electric motor 460/3/60
- High static fan (14.5" W.G.)
- 10,000 lbs. Torflex axles
- Emergency engine shutdown
- 20 lbs. ABC fire extinguisher
- Cone vibrator (electric or pneumatic)
- Cummins or Kubota diesel engine
- 74 HP, 2.48 L, Tier 4 Final Kohler engine

Skid Mounted Vacuums

Hurricane 400EM

Dimensions
- 129"L x 96"W x 123" H (Stowed) or 177" (Raised)
- 8,500 lbs.
Skid Mounted
- 4" x 8" rectangular tube frame, fork pockets & certified lifting cage
Power Source
- 75 HP electric motor, 460 V, 3 Phase hostile duty motor (full load amps 96)
Sound Attenuation Package
- 1 blower discharge silencer & 1 inlet blower silencer
Vacuum Air Flow (Blower)
- Roots Dresser 412 DVJ, 1332 CFM capable of 27" Hg, 5 belt driven with OSHA approved guard
Filtration System - 3 Stage
- Cyclonic separation
- Baghouse - 37 Teflon coated quick change filter bags with continuous reverse pulse air cleaning
- High-effieciency blower safety filter
Instrument Panel (NEMA 4)
- Soft start package, push-button on/off switch with indicator light, disconnect lever, filter cleaning on/off switch, material dump on/off switch
Standard Equipment
- Paint: One color (custom lettering available)
- Wet or dry operation
- Automatic cone vibrator
- Emergency stop button with 50' cord
Options
- Rotary discharge valve
- Double dump discharge valve
- 16" manhole on baghouse
- Auger in hopper (cone)
- Hydraulics (lift cylinder)
- HEPA filtration
- Tool box
- Air compressor - 120 PSI
- Trailer mounted to DOT standards

Hurricane 500EM

Dimensions
- 129"L x 79"W x 120" H (Stowed) or 163" (Raised)
- 10,000 lbs.
Skid Mounted
- 4" x 8" rectangular tube frame, fork pockets & certified lifting cage
Power Source
- 100 HP electric motor, 460 V, 3 Phase hostile duty motor (full load amps 115)
Sound Attenuation Package
- 12" blower discharge silencer & 12" inlet blower silencer
Vacuum Air Flow (Blower)
- Roots Dresser 616 DVJ, 2350 CFM capable of 23" Hg, 5 belt driven with OSHA approved guard
- 150 HP option: 2350 CFM capapable of 27" Hg
Filtration System - 3 Stage
- Cyclonic separation
- Baghouse - 37 Teflon coated quick change filter bags with continuous reverse pulse air cleaning
- High-effieciency blower safety filter
Instrument Panel (NEMA 4)
- Soft start package, push-button on/off switch with indicator light, disconnect lever, filter cleaning on/off switch, material dump on/off switch
Standard Equipment
- Paint: One color (custom lettering available)
- Wet or dry operation
- Automatic cone vibrator
- Emergency stop button with 50' cord
Options
- 150 HP electric motor
- Slide gate discharge
- 16" manhole on baghouse
- Auger in hopper (cone)
- Hydraulics (lift cylinder)
- HEPA filtration
- Tool box
- Air compressor - 120 PSI
- Trailer mounted to DOT standards

Hurricane 800EM

Dimensions
- 189"L x 96"W x 123" H (Stowed) or 184" (Raised)
- 14,500 lbs.
Vacuum Structural Frame
- Skid mounted 4" x 6" rectangular tube frame, 6" x 12" fork pockets 4 point certified lift cage with padeyes
- Sub frame for motor & blower package with vibration isolators
Power Package 1:
- 200 HP, 480 V, 3 Phase extreme duty motor. Direct drive to Roots 4200 CFM blower capable of 28" Hg
Power Package 2:
- 300 HP, 480 V, 3 Phase extreme duty motor. Direct drive to Roots 5660 CFM blower capable of 28" Hg
Filtration System - 3 Stage
- Cyclonic separation
- 37 Teflon coated, quick change filter bags with continuous air pulse cleaning
- Dual blower safety filters with optional HEPA filtration
Instrument Panel
- NEMA 4 (NEMA 4X stainless steel option) soft start package, push button motor start/stop with indicator light, disconnect lever, filter cleaning on/off switch, vacuum system on/off
Standard Equipment
- Paint: One color (custom lettering available)
- Wet or dry operation
- Automatic cone vibrator
- Emergency stop button
- 10" inspection manhole
- Flip top lid on baghouse
- Dirty filter shut down system
Options
- HEPA filtration
- Tool box
- Hydraulic lift package
- Air compressor - 120 PSI
- Trailer mounted
- Hydraulic auger in cone
- Rotary valve
- Doube dump valve
Industries
- Sandblasting/Painting
- Ship Cleaning
- Blast Recovery
- Wastewater Treatment

Quiet Cube 150 Electric

Dimensions
- 143"L x 102"W x 120" H (Stowed) or 183" (Raised)
- 9,500 lbs.
Skid Mounted
- 4" x 8" rectangular tube frame, fork pockets & certified lifting cage
Power Source
- 150 HP electric motor, 460 V, 3 Phase, hostile duty motor (full load amps 163, no load 48.8)
Sound Attenuation "Quiet Cube Package"
- Dual inlet and discharge silencers with sound attenuation enclosure
Vacuum Air Flow (Blower)
- Roots Dresser 2350 CFM capable of 27" Hg, 5 belt driven, with guard
Filtration System - 3 Stage
- Cyclonic separation
- Baghouse - Teflon coated quick change filter bags with continuous reverse pulse air cleaning
- High-efficiency blower safety filter
Instrument Panel (NEMA 4)
- Soft start package, push-button on/off switch with indicator light, disconnect lever, filter cleaning on/off switch, material dump on/off switch
Standard Equipment
- Paint: One color (custom lettering available)
- Wet or dry operation
- Automatic cone vibrator
- Emergency stop button
- 10" inspection manhole
- Flip top lid on baghouse
Options
- Slide gate discharge
- 16" manhole on baghouse
- Auger in hopper (coe)
- Hydraulics (lift cylinder)
- HEPA Filtration
- Tool box
- Air compressor - 120 PSI
- Trailer-mounted to DOT standards

Quiet Cube 200 Electric

Dimensions
- 176"L x 102"W x 128" H (Stowed) or 189" (Raised)
- 15,000 lbs.
Skid Mounted
- 4" x 10" rectangular tube 3-way frame, fork pockets & certified lifting cage
Power Source
- 200 HP electric motor, 460 V, 3 Phase, premium efficiency (full load amps 222, no load 86)
Sound Attenuation Package
- Patented "Quiet Cube" technology. 85 DBA at full vacuum
Vacuum Air Flow (Blower)
- Positive displacement of up to 4500 CFM capable of 27" Hg, 6 belt driven, with guard
Filtration System - 3 Stage
- Cyclonic separation
- Baghouse - Teflon coated quick change filter bags with continuous reverse pulse air cleaning
- Dual high-efficiency blower safety filters
Instrument Panel (NEMA 4)
- Soft start package, push-button on/off switch with indicator light, disconnect lever, air pulse on/off switch, vacuum on/off switch
Standard Equipment
- Paint: One color (custom lettering available)
- Wet or dry operation
- Automatic cone vibrator
- Emergency stop button
- 10" inspection manhole
- Tool less flip-top baghouse lid
- Gravity style dump door
- One year warranty
Options
- Manual discharge valve
- Auger in hopper (cone)
- Hydraulics (lift hopper)
- HEPA Filtration
- Tool box
- Air compressor - 120 PSI

Quiet Cube 250 Electric

Dimensions
- 162"L x 100"W x 126" H (Stowed) or 183" (Raised)
- 16,000 lbs.
Skid Mounted
- 4" x 8" rectangular tube frame, fork pockets & certified lifting cage
Power Source
- 250 HP electric motor, 460 V, 3 Phase, hostile duty (full load amps 282, no load 86)
Sound Attenuation Package
- Inlet and discharge silencers with sound attenuation enclosure
Vacuum Air Flow (Blower)
- Positive displacement 5600 CFM capable of 28" Hg, 5 belt driven, with guard
Filtration System - 3 Stage
- Cyclonic separation
- Baghouse - Teflon coated quick change filter bags with continuous reverse pulse air cleaning
- Dual high-efficiency blower safety filters
Instrument Panel (NEMA 4)
- Soft start package, push button on/off switch with indicator light, disconnect lever, air pulse on/off switch, material dump on/off switch
Standard Equipment
- Paint: One color (custom lettering available)
- Wet or dry operation
- Automatic cone vibrator
- Emergency stop button
- 10" inspection manhole
- One year warranty
Options
- Manual discharge valve
- Auger in hopper (cone)
- Hydraulics (lift cylinder)
- HEPA Filtration
- Tool box
- Air compressor - 120 PSI
- Trailer mounted to DOT standards
- 300 HP electric motor

Vessel Vac 2000X

Dimensions
- 240"L x 100"W x 126"H
- 23,000 lbs.
Skid Mounted
- Rectangular tube frame, 6" x 12" fork pockets, certified lift cage for overhead lifting & operator's step-up for entrance
Power Source
- 150 HP electric motor, TEFC, 460 V, 3 Phase
Sound Attenuation Package
- Dual inlet & discharge silencers with sound attenuation enclosure
- Maximum 84 DBA at full vacuum
Pump
- 2400 CFM capable of 27" Hg, belt drive
Storage Capacity
- (2) Separate 1,000 gallon Type 316 stainless steel collection vessels with stainless steel manhole access; vessels are rated for vacuum & pressure
Safety Protection
- Operating Station
  - Roof protection from outside elements
  - Lights
- Collection Vessel
  - Spill containment system
  - Regulated air inlet connection
  - Automatic high level shutdown system
  - Manual fill indicator
  - Dual pressure relief valve
- Vacuum System
  - Emergency stop button for vacuum break
- Filtration System
  - Stainless steel pre-screen collection system with quick release hinged cover for easy access and cleaning: two inlets with ball valves
  - Cyclonic water separator with drain
  - Final moisture control system with quick release element
  - Maintenance clean-up port with manual ball valve
- Vessel Transfer System
  - Specially designed "NMP Valves" switch between collection vessels for loading and unloading (this enables the system to continuously operate without shutting down the system)
- Electrical & Instrument Panel Information
  - 150 HP rated soft start enclosure, NEMA 4, 460 V, 3 Phase disconnect, circuit breaker, and overload motor protection
  - Electrical Camlock connections
- Operation Controls
  - Level indicator lights
  - Discharge system switch & indicator lights
  - E-Stop button for system shutdown

Trailer Mounted Vacuums

Hurricane 400 - Trailer Mounted

Dimensions
- 205"L (Lowered) or 284"L (Raised) x 99"W x 131"H (Lowered) or 219"H (Raised)
Trailer Mounted
- Chassis - tandem 7,000# axles, 4" x 5" rectangular tube frame, with four 8-lug LT 265/75 R16 load C tires (9880# Max. Capacity), DOT lighting with electric brakes
Power Source
- Kubota Tier 4 diesel engine 74 HP @ 2,400 RPM
P.T.O. (clutch)
- NACD
Vacuum Air Flow (blower)
- Positive displacement, 1300 CFM capable of 27" Hg, 4 belt driven with guard (Roots 412 DVJ)
Filtration System (3-stage)
- Cyclonic separation
- Baghouse/37 Teflon coated, quick change filter bags with continous revers pulse air cleaning and tool-less flip top lid
- High efficiency horizontal blower safety filter with quick-release bolt clamps
Hydraulics
- 3.5 GPM, 2200 PSI, direct driven
Enclosure
- Lockable steel shroud over engine
Instrument Panel
- 12 volt key start, safety system (low oil pressure/high water temperature alarm)
- Oil pressure, water temperature, ammeter, tachometer with hour meter, filter cleaning on/off switch, material vacuum & dump time controls
Air Compressor
- VMAC rotary screw compressor & air dryer with electronic heater
- AMSE certified air tank mount on vibration isolators
Safety Features
- OSHA approved belt guard
- Remote emergency stop button
- Safety struts for baghouse
- Emergency breakaway chain
- Wheel chocks
- Optional HEPA filtration
- Electric brakes
- Low oil or high temp. engine shutdown
Standard Equipment
- Paint: One color (custom lettering available)
- Wet or dry operation
- Automatic cone vibrator
- 50 gallon fuel tank
- Adjustable pintle hook
- Emergency stop button
- 10" inspection door (hopper)
- Tool-less flip top lid on baghouse
Options
- Spare tire & carrier
- Cold weather package
- HEPA filtration
- Hydraulic lift leg to level trailer
- Slide gate discharge
- Asbestos/hazardous waste package
- Auger in cone
- Auxiliary air hose 120 PSI
- Toolbox
- Hydraulic surge brake

Hurricane 500 - Trailer Mounted

Dimensions
- 214"L (Lowered) or 293"L (Raised) x 100"W x 133"H (Lowered) or 220"H (Raised)
Trailer Mounted
- Chassis - tandem 7,000# axles, 4" x 6" rectangular tube frame, with four 8-lug 2325/85/R16 ten ply radials
- DOT lighting with electric brakes
Power Source
- John Deere Tier 4 turbo-charged diesel engine
- 4 cylinder, 4.5 liter, 173 HP @ 2,400 RPM
P.T.O. (clutch)
- Heavy duty NACD 11.5" clutch
Vacuum Air Flow (blower)
- Positive displacement, 2350 CFM capable of 28" 5 belt driven with guard (Roots 616 DVJ or equal)
Filtration System (3-stage)
- Cyclonic separation
- Baghouse/37 Teflon coated, quick change filter bags with air cannon providing reverse pulse filter cleaning
- Horizontal mounted high efficiency blower safety filter, tool-less filter changeout
Hydraulics
- 4.5 GPM, 2200 PSI, direct drive
Enclosure
- Lockable steel shroud over engine
Instrument Panel (fully enclosed)
- 12 volt key start, safety system (low oil pressure/high water temperature auto shutdown)
- Oil pressure, water temperature, ammeter, tachometer with hour meter, filter cleaning on/off switch, material vacuum & dump time controls
Air Compressor
- Direct drive Bendix twin cylinder; water cooled & oil pressure fed. Haldex air dryer with electronic heater
- AMSE certified air tank mounted on vibration isolators (provides air to pneumatic controls and self deaning filter system)
Safety Features
- OSHA approved belt guard
- Remote emergency stop button
- Safety struts for baghouse
- Emergency breakaway chain
- Wheel chocks
- Optional HEPA filtration
- Electric brakes
- Low oil or high temp. engine shutdown
Standard Equipment
- Paint: One color (custom lettering available)
- Wet or dry operation
- Automatic cone vibrator
- 100 gallon fuel tank
- Adjustable pintle hook
- Emergency stop button
- 10" inspection door (hopper)
- Hydraulic lift leg to level trialer
- Spare tire & carrier
- Tool-less flip top lid on baghouse
Options
- Cold weather package
- HEPA filtration
- Slide gate discharge
- Auxiliary 50 gallon fuel tank
- 16" manhole on baghouse
- Asbestos/hazardous waste package
- Auger in cone
- Auxiliary air hose 120 PSI
- Skid mount
- 150 HP electric motor
- 4 point certified lifting cage
- High reach package

Hurricane 755 - Trailer Mounted

Dimensions
- 241"L (Lowered) or 321"L (Raised) x 99"W x 141"H (Lowered) or 230"H (Raised)
Trailer Mounted
- Chassis - tandem 8,000# axles, 4" x 6" rectangular tube frame, with four 8-lug P225/R-16 ten ply radials
- DOT lighting with electric brakes
- Trailer light wiring harnes, with 7-pin connector
Power Source
- John Deere Tier 4 turbo-charged diesel engine
- 6.8L, 225 HP @ 2,200 RPM
P.T.O. (clutch)
- Double disc, 11.5" with iron plates
Vacuum Air Flow (blower)
- Roots Dresser 3660 CFM capable of 28" Hg, direct drive through flex coupling, with easy access guard
Filtration System (3-stage)
- Cyclonic separation
- Baghouse/37 Teflon coated, quick change filter bags with continuous reverse pulse air cleaning
- Dual high efficiency blower safety filters with dirty filter shut-down system
Hydraulics
- 4.5 GPM, 2200 PSI, direct drive
Enclosure
- Lockable steel shroud over engine
Instrument Panel (fully enclosed)
- 12 volt key start, safety system (low oil pressure/high water temperature auto shutdown)
- Digital: Oil pressure, water temperature, ammeter, RPM, hour meter. Filter cleaning on/off switch, material vacuum & dump time controls, air compressor psi gauge
Air Compressor
- Direct drive Bendix twin cylinder; water cooled & oil pressure fed. Haldex air dryer with electronic heater
- AMSE certified air tank mounted on vibration isolators (provides air to pneumatic controls and self deaning filter system)
Safety Features
- OSHA approved drive guard
- Remote emergency stop button
- Safety struts for baghouse
- Emergency trailer breakaway chain
- Wheel chocks
- Optional HEPA filtration
- Electric brakes
- Low oil or high temp. engine shutdown
Standard Equipment
- Paint: One color (custom lettering available)
- Wet or dry operation
- Tool box
- Automatic cone vibrator
- 100 gallon fuel tank
- Adjustable pintle hook
- Remote emergency stop button
- Dual front hydraulic lift legs to level trailer
- Spare tire & carrier
- Hinged dome on baghouse
Options
- Cold weather package
- HEPA filtration
- Slide gate discharge
- Hazardous waste package
- Auger in hopper (cone)
- High reach package for discharge (Up to 11')
- Auxiliary air hose 120 PSI
- Skid mount
- 4 point certified lifting cage
- Gooseneck trailer

Hurricane 828 - Trailer Mounted

Dimensions
- 257"L (Lowered) or 337"L (Raised) x 99"W x 141"H (Lowered) or 230"H (Raised)
Trailer Mounted
- Chassis - tri-axles 8,000#, 4" x 6" rectangular tube frame, with six 8-lug LT235/85 R-16 fourteen ply steel belted radials
- DOT lighting with electric brakes
- Trailer light wiring harnes, with 7-pin connector
Power Source
- John Deere Tier 4 turbo-charged diesel engine
- 335 HP @ 1,800 RPM
P.T.O. (clutch)
- Triple disc, 14" with iron plates
Vacuum Air Flow (blower)
- Roots Dresser 5660 CFM capable of 28" Hg, direct drive through flex coupling, with easy access guard
Filtration System (3-stage)
- Cyclonic separation
- Baghouse/37 Teflon coated, quick change filter bags with continuous reverse pulse air cleaning
- Dual high efficiency blower safety filter
Hydraulics
- 4.5 GPM, 2200 PSI, direct drive
Enclosure
- Lockable steel shroud over all major components
Instrument Panel (fully enclosed)
- 12 volt key start, safety system (low oil pressure/high water temperature auto shutdown)
- Digital: Oil pressure, water temperature, ammeter, RPM, hour meter. Filter cleaning on/off switch, material vacuum & dump time controls, air compressor psi gauge
Air Compressor
- Direct drive Bendix twin cylinder; water cooled & oil pressure fed. Haldex air dryer with electronic heater
- AMSE certified air tank mounted on vibration isolators (provides air to pneumatic controls and self deaning filter system)
Safety Features
- OSHA approved drive guard
- Remote emergency stop button
- Safety struts for baghouse
- Emergency trailer breakaway chain
- Wheel chocks
- Optional HEPA filtration
- Low oil or high temp. engine shutdown
Standard Equipment
- Paint: One color (custom lettering available)
- Wet or dry operation
- Tool box
- Automatic cone vibrator
- 100 gallon fuel tank
- Adjustable pintle hook
- Remote emergency stop button
- Dual front hydraulic lift legs to level trailer
- Spare tire & carrier
- Hinged dome on baghouse
Options
- Cold weather package
- HEPA filtration
- Slide gate discharge
- Hazardous waste package
- Auger in hopper (cone)
- High reach package for discharge (Up to 11')
- Auxiliary air hose 120 PSI
- Skid mount
- 200 HP electric motor
- 4 point certified lifting cage
- High reach package
- Gooseneck trailer

Dehumidifiers/Air Conditioners

DH/AC 5000 and DH/AC 5000HP

Skid Mounted
- Four sided fork truck tables
- 130"L x 82"W x 69"H
- 4,100 lbs.
Stackable
- Four point shipyard lifting cage with connections at 69" requiring no steps to connect rigging
- Certified lifting eyes with certification printed on unit
Power Source
- 480 V, 3 Phase
- Full Load Amps: 120 Amps (Full heat & A/C operation)
Quiet Operation
- Below 83 decibels at 3 meters
- 3-in-1 cooling, DH and blower unit
Fan (DH/AC 5000)
- 5,000 CFM
- 12.5 ton A/C, 54KW heat
Fan (DH/AC 5000HP)
- 25 HP direct drive high static blower
- 5,000 CFM @ 16" W.C.
- 12.5 ton A/C, 54KW heat
Standard Equipment
- Powder coated galvanized steel
- 7 level variable temperature and humidity settings with a flip of a switch
- Camlock electrical connections with S.S. ground stud
- (2) 12" duct connections
- Continuous duty cycle
- 150 Amp circuit breaker
- One year warranty

DH/AC 8000 and DH/AC 8000HP

Specifications
- DH/AC 8000: Nominal 8000 CFM
- DH/AC 8000 HP: Nominal 8000 CFM at 16" W.C. High pressure supply fan
- 20 tons of cooling capacity. 54 KW heating capacity - 2 stage
- 480 V, 3 Phase
- Full Load Amps
  - DH/AC 8000: 117 Amps (Full heat & A/C Operation)
  - DH/AC 8000 HP: 140 Amps (Full heat & A/C Operation)
- Full AC/Heat simultaneous operation
- 100% outdoor air unit
- 3-in-1 cooling, DH and blower unit
- Continuous duty cycle
- Refrigerant: R-410A
- 110 FLA @ 60 Hz
- (4) 12" duct hose connections
- Individually fused electrical components
- Quiet operation
- User friendly on/off control switches. Run time hour meter
- Camlock male electrical connections with S.S. ground stud
- Variable temperature and humidity settings, run time hour meter
- Power phase monitor with "IN/OUT of Phase" lights
- Hose-bib cooling coil condensate connection
- Filter section - 2" pleated
- Condenser coil protection screen
- Hinged access doors
- Stackable four point shipyard lifting cage with connections at 63" requiring no steps to connect rigging
- Four side fork truck tubes large enough for an 8 ton fork truck
- Certified lifting eyes with certification printed on unit
- Dimensions: 163"L x 97"W x 74"H
- 6,500 lbs.
- Warranty: 90 day parts & labor. 12 months parts only

Industrial Blowers

Portable 600 CFM Ventilation Blower

Model #EV 600-ALUM
Dimensions
- 22-1/2"L x 21-3/4"W x 22-15/16"H
- 74 lbs.
Air Volume
- 600 ACFM at - 9" W.G.
Power Source
- 2 HP, 115 V, 1 Phase TEFC motor with on/off controls in a NEMA 4X enclosure

Construction
- AMCA Type B, .190" Aluminum construction with portable base and lifting handle
Standard Equipment
- (1) 8" flanged inlet duct connection with guard
- (1) 8" flanged outlet duct connection with guard
- Aluminum portable support base with lifting handle
- Aluminum fan and wheel construction
- 2 HP 115/1/60 electric motor, TEFC
- 2 HP NEMA 4X rated motor starter on/off
- 12/3 SEO Pre-wired cord with watertight plug
- Epoxy primer and polyurethane enamel top coat
Options
- Carbon steel construction
- Skid base with fork pockets
- 3 phase electric motor
- Transportable dolly cart
- Silencer (intake or discharge)
- Damper (inlet or outlet)
- Sound package for quiet operation
- Explosion proof motor and controls
- Ducting and hose accessories

25 HP Electric Ventilation Blower

Dimensions
- 66"L x 48"W x 101"H
- 2,700 lbs.
Steel Skid
- Certified lifting padeyes, 4" x 10" fork tubes on four sides
Blower
- Cincinnati fan, AMCA B spark resistant construction, SQBI-180, class III wheel, high pressure backward-curved, Arr 4 upblast, 7200 CFM @ 14" W.G., direct drive, housing access door and bottom drain, flanged connections
Motor
- 25 HP, 3530 RPM, 480 V, 3 Phase, 60 Hz, TEFC
- Severe duty premium efficiency
  - Explosion Proof Class I Group D optional motor)
Motor Controller
- NEMA 4X stainless steel construction, motor starter with circuit breaker disconnect (pad lockable), start/stop pushbuttons, operating pilot
  - NEMA 7 Explosion Proof Class I Group D optional enclosure
Outlet Silencer
- Heavy duty carbon steel construction (interior/exterior), vertical discharge with automatic rain cap, flanged connection, welded seams, wire mesh spacer, Fiberglass cloth and insulation - dBa @ 5'
Inlet Fan Adapter
- Flanged connections, welded seams, (2) flanged 12" diameter hose connection collars
Sound Attenuation Package (Optional)
- Complete sound attenuating enclosure consisting of vertical foam panels surrounding entire unit - 75 dBa @ 5'

12,000 Diesel Ventilation Blower

Dimensions
- 165"L x 97"W x 88"H
- 3,300 lbs.
Mobile or Skid Mounted
- Heavy duty 2" x 4" structural frame
Trailer
- Single axle, 6,000 lbs. Torflex with electronic brakes
Power Source
- Available in a diesel or electronic powered model
- 24 HP, 1.03 liter, Tier 4 Final Kohler engine
High Capacity
- Air flow of 12,000 CFM at 4" W.G.
Standard Equipment
- Steel construction with single point lift eye, (4) D-ring tie downs
- Pintle styler trailer, electric brakes, (2) stabilizing jacks
- DOT approved LED trailer lighting & reflective recognition tape
- Standard one year limited warranty
- (1) 18" diameter QF inlet with safety screen
- (1) 18" diameter QF outlet with safety screen
- Steel engine shroud
- 38 gallon fuel tank - extended run time
- 12 VDC strobe light
- Engine block heater 120 VAC
- High quality finish - epoxy primer & polyurethane top coat
Options
- Cummins, John Deere or Kubota Engine
- Skid base with fork pockets
- 460 V, 3 Phase electric motor
- Hose storage with locking compartment
- Silencer (intake or discharge)
- LED work lights
- Manual Damper (inlet or outlet) Explosion
- Proof motor & controls
- 3,500 lbs. Tandem Leaf spring axles
- 20 lbs. ABC fire extinguisher
- AMCA type B fan construction, aluminum
- Ducting and hose accessories

20,000 Diesel Ventilation Blower

Dimensions
- 152"L x 99"W x 106"H
- 3,750 lbs.
Mobile or Skid Mounted
- Heavy duty 2" x 4" C-channel frame
Trailer
- Single axle, 6,000 lbs. Torflex with electronic brakes
Power Source
- Available in a diesel or electronic powered model
- 56 HP, 1.86 liter, Tier 4 Final Kohler engine
High Capacity
- Air flow of 12,000 CFM at 4" W.G.

Standard Equipment
- Steel construction with single point lift eye, (4) D-ring tie downs
- Pintle styler trailer, electric brakes, (2) stabilizing jacks
- DOT approved LED trailer lighting & reflective recognition tape
- Standard one year limited warranty
- (1) 24" diameter QF inlet with safety screen
- (1) 24" diameter QF outlet with safety screen
- Steel engine shroud
- 99 gallon fuel tank - extended run time
- 12 VDC strobe light
- Engine block heater 120 VAC
- High quality finish - epoxy primer & polyurethane top coat
Options
- Cummins, John Deere or Kubota Engine
- Skid base with fork pockets
- 460 V, 3 Phase electric motor
- Emerge4ncy air shutoff valve
- Silencer (intake or discharge)
- LED work lights
- Manual Damper (inlet or outlet)
- Explosion proof motor & controls
- Tandem 6,000 lbs. Torflex axles
- High static fan upgrade (16" W.G.)
- 20 lbs. ABC fire extinguisher
- AMCA type B fan construction, aluminum
- Ducting and hose accessories

Industrial Heaters

60kW Electric Heater

Dimensions
- 53"L x 39"W x 48"H
- 900 lbs.
Air Volume/Heat
- BTU: 204,780
- Delta T at 2,500 ACFM: 76.6 degrees F
- Delta T at 5,000 ACFM: 38.3 degrees F
Power Source
- 72 amps, 460 V, 3 Phase, 60 Hz NEMA 4 enclosure
Construction
- Carbon steel base and ducting box
Standard Equipment
- 204,780 BTU, 460 V, 3 Phase, 60 Hz, 72 Amps
- NEMA 4 enclosure, disconnect switch, 24 volt controls
- Camlock electrical panel connections, E-1016 series
- Carbon steel base with fork pockets, lifting cage, stackable
- Ducting box with access cover, fin & tube heating elements
- (1) 19-1/2" diameter, slip-on inlet hose connection with safety screen
- (1) 19-1/2" diameter, slip-on outlet hose connection with safety screen
- Air flow switch with indicator light, 2 stages of heat with indicator
- Automatic thermal shutdown, 260 degrees F
- Standard one year limited warranty
- High quality finish - epoxy primer & polyurethane top coat
Options
- Prewired power cable (specify length)
- NEMA 4 stainless steel enclosure
- Wired 208-230V, 3 Phase, 114 Amps
- Dual Voltage with 230/460 switch
- Remote thermostat probe with temp. display
- Remote thermostat interface 2-10 VDC
- Remote thermostat interface 4-20 mA
- QF style hose connections (specify diameter)
- Ducting and hose accessories

150kW Electric Heater

Dimensions
- 71"L x 49"W x 54"H
- 1400 lbs.
Air Volume/Heat
- BTU: 512,000
- Delta T at 7,000 ACFM: 68.5 degrees F
- Delta T at 12,500 ACFM: 38.7 degrees F
Power Source
- 198 amps, 460 V, 3 Phase, 60 Hz NEMA 4 enclosure
Construction
- Carbon steel base and ducting box
Standard Equipment
- 512,100 BTU, 460 V, 3 Phase, 60 Hz, 198 Amps
- NEMA 4 enclosure, disconnect switch, 24 volt controls
- Camlock electrical panel connections, E-1016 series
- Carbon steel base with fork pockets, lifting cage, stackable
- Ducting box with access cover, fin & tube heating elements
- (1) 19-1/2" diameter, slip-on inlet hose connection with safety screen
- (1) 19-1/2" diameter, slip-on outlet hose connection with safety screen
- Air flow switch with indicator light, 4 stages of heat with indicator
- Automatic thermal shutdown, 260 degrees F
- Standard one year limited warranty
- High quality finish - epoxy primer & polyurethane top coat
Options
- Prewired power cable (specify length)
- NEMA 4 stainless steel enclosure
- VFD motor control
- Remote thermostat probe with temp. display
- Remote thermostat interface 2-10 VDC
- Remote thermostat interface 4-20 mA
- QF style hose connections (specify diameter)
- Ducting and hose accessories

Drum Top Vacuum

Single Motor Vacuum

Model #DT55
Specs:
- Power: 110V-120V, 9 amp
- Air Flow: 106 CFM
- Inches of Hg: 6.5"
- Filtration: STD
- Float: No
- Tool Kit: 1.5" or 2"

Single Motor Vacuum with HEPA Filter & Water Shut-Off Float

Model #DT55HF

Specs:
- Power: 110V-120V, 9 amp
- Air Flow: 106 CFM
- Inches of Hg: 6.5"
- Filtration: Yes
- Float: Yes
- Tool Kit: 1.5" or 2"

Other Model #'s This Size

Model #DT55F
Model #DT55h

Twin Motor Vacuum

Model #DT255

Specs:
- Power: 110V-120V, 15 amp
- Air Flow: 211 CFM
- Inches of Hg: 6.5"
- Filtration: STD
- Float: No
- Tool Kit: 1.5" or 2"

Twin Motor Vacuum with HEPA Filter & Water Shut-Off Float

Model #DT255H

Specs:
- Power: 110V-120V, 15 amp
- Air Flow: 211 CFM
- Inches of Hg: 6.5"
- Filtration: HEPA
- Float: No
- Tool Kit: 1.5" or 2"

Other Model #'s This Size

DT255F
DT255HF

Quad Motor Vacuum

Model #DT455

Specs:
- Power: (2) 110V or (1) 220V120V
- Air Flow: 400 CFM
- Inches of Hg: 6.5"
- Filtration: STD
- Tool Kit: 2" or 3"

Twin Motor Vacuum with Final HEPA Filter

Model #DT455H

Specs:
- Power: (2) 110V or (1) 220V120V
- Air Flow: 400 CFM
- Inches of Hg: 6.5"
- Filtration: HEPA
- Tool Kit: 1.5" or 2"

Single Venturi Vacuum

Model #DT55AP
Specs:
- Air Input Requirements: 70 CFM @ 65 PSI
- Air Flow: 110 CFM
- Inches of Hg: 12"
- Filtration: STD
- Tool Kit: 1.5 to 2"

Single Venturi Vacuum with Final HEP Filter

Model #DT55APH
Specs:
- Air Input Requirements: 70 CFM @ 65 PSI
- Air Flow: 110 CFM
- Inches of Hg: 12"
- Filtration: HEPA
- Tool Kit: 1.5 to 2"

Double Venturi Vacuum

Model #DT255AP
Specs:
- Air Input Requirements: 140 CFM @ 65 PSI
- Air Flow: 210 CFM
- Inches of Hg: 12"
- Filtration: STD
- Tool Kit: 1.5 to 2"

Double Venturi Vacuum with Final HEP Filter

Model #DT255APH
Specs:
- Air Input Requirements: 140 CFM @ 65 PSI
- Air Flow: 210 CFM
- Inches of Hg: 12"
- Filtration: HEPA
- Tool Kit: 1.5 to 2"